Fiat 500 C Owner's Handbook Manual page 131

❒ For vehicles with wheel cap: use
the screwdriver provided, applying
leverage to the dedicated opening
on the outer edge.
❒ For cars fitted with alloy wheels:
remove the press-fitted hub cap
using the screwdriver provided.
❒ Loosen the fixing bolts for the
wheel to be changed by about one
turn using the spanner provided.
❒ Partially open the jack using the
handle.
❒ Arrange the jack close to the wheel
to be changed, next to the sign
fig. 100-101 indicated on the
bodywork.
99
❒ If the vehicle is equipped with side
skirts, to let the jack pass under the
vehicle, the latter must be tilted (as
shown in 102)
❒ Make sure the jack is correctly
positioned (see fig. 103)
❒ Warn anybody who is nearby that
the car is about to be raised.
They should stay clear and they
should be warned not to touch the
car until it is back on the ground.
100
DVDF0S062c
101
102
DVDF0S063c
103
DVDF0S064c
DVDF0S0163c
DVDF0S065c
129