Fiat 500 C Owner's Handbook Manual page 76

The mobile phone audio is transmitted
through the audio system of the car;
the system automatically mutes the
radio when the Phone function is used.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Pairing a mobile phone
To pair the mobile phone, proceed as
follows:
❒ activate the Bluetooth® function
on the mobile phone;
❒ press the PHONE button on the
front panel;
❒ if no phone is paired with the
system yet, the display shows a
dedicated screen;
❒ select "Yes" to start the pairing
procedure, then search for the
Uconnect™ device on the mobile
phone (if "No" is selected, the
Phone main screen is displayed);
❒ when prompted by the mobile
phone, use its keypad to enter the
PIN code shown on the system
display or confirm on the mobile
phone the PIN displayed;
74
❒ from the "Phone" screen you can
always pair a mobile phone by
pressing the "Settings" button:
press the "Add Device" button and
proceed as described above;
❒ during the pairing stage a screen is
displayed showing the progress of
the operation;
❒ when the pairing procedure is
completed successfully, a screen is
displayed: answer "Yes" to the
question to pair the mobile phone
as favourite (the mobile phone will
have priority over all other mobile
phones to be paired subsequently).
If no other devices are paired, the
system will consider the first
associated device as favourite.
NOTE After updating the phone
software, for correct operation it is
advisable to remove the phone from
the list of devices paired to the radio,
delete the previous system pairing also
from the available Bluetooth® device
list on the phone and pair it again.
Calling
The operations described below can
only be accessed if supported by the
mobile phone in use.
For all functions available, refer to the
mobile phone owner's handbook.
A call can be made by:
❒ selecting the icon
(phonebook);
❒ selecting "Recent Calls";
❒ selecting the icon
;
❒ pressing the "Redial" button.
Text message reader
The system can read the messages
received by the mobile phone.
To use this function the mobile phone
must support the text exchange
function through Bluetooth®.
If this function is not supported by the
phone, the corresponding graphic
button is deactivated (greyed out).
When a text message is received, the
display will show a screen where the
options "Listen", "Call" or "Ignore" can
be selected.