Shift Paddles - Fiat 500 C Owner's Handbook Manual

ECO function
The ECO function, which optimises the
gearbox, can be activated only with
AUTO mode on.
This function is activated by pressing
button E fig. 88 on the trim next to the
gear lever (on 1.2 8V versions), or by
pressing the ECO button fig. 89 on the
dashboard (on 0.9 TwinAir 85 HP
versions).
With the ECO function active, the
display will show the current gear and
the words AUTO and ECO; the system
will select the most suitable gear
depending on the car speed, engine
rpm and intensity with which the
accelerator pedal is pressed, with the
aim of limiting fuel consumption.
89
122
SPORT function
(1.4 16V versions – for versions /
markets, where provided)
On these versions, the driver can also
use the SPORT function which enables
a sporty driving setting by intervening
on gear changes, the engine control
unit and the steering. To activate this
function, press the SPORT button
fig. 90 on the dashboard.
90
DVDF0S0193c

SHIFT PADDLES

(for versions/markets, where provided)
fig. 91
Shifting can be managed sequentially
via the shift paddles on the steering
wheel.
❒ To use the steering wheel paddles,
the gear lever A-fig. 88 must be in
the middle position between
+ and –.
To shift up: pull the right paddle +
towards the steering wheel.
To shift down: pull the left paddle –
towards the steering wheel.
DVDF0S0194c
91
NOTE Shifting up (or down) is only
permitted if the engine rpm allow it.
NOTE For correct use of the system,
you are advised only to use your right
foot to operate the pedal unit.
DVDF0S0195c