Table of Contents
Advertisement
Topcom Butler 4011/4011C Sim
•
The RFPI code (each base unit has a unique RFPI code) appears on the display and a
signal sounds once the base unit is found by the handset.
•
Press the Programming key
•
'PIN' appears on the display.
•
Enter the 4-digit PIN code of the base unit (default PIN code is '0000'). Use the number
keypad.
•
Press the Programming key
•
The handset is subscribed to the base unit.
4.25 Removing subscription of a handset to a base unit
It is possible to cancel subscription of a handset to a base unit. You would do this if a
handset is damaged and has to be replaced by a new one.
You can only cancel subscription of another handset, not the handset you
are using to do the cancellation procedure.
•
Press the Programming key
•
Press the Up or Down key
•
Press the Programming key
•
Press the Up or Down key
•
Press the Programming key
•
'PIN' appears on the display.
•
Enter your 4-digit PIN code in (default PIN code is '0000'). Use the number keypad.
•
Press the Programming key
•
'REMOVE HS' appears on the display.
•
Dial the number of the handset you want to remove (1 –5). Use the number keypad.
•
Press the Programming key
•
'REMOVE HS' appears on the display and the handset is removed
•
NOT SUB' appears on the handset removed.
4.26 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:
4.26.1 Automatic selection
If you set the handset to 'automatic selection', the handset will automatically choose the
closest base unit in standby.
•
Press the Programming key
•
Press the Up or Down key
•
Press the Programming key
•
Press the Up or Down key
•
Press the Programming key
•
Press the Up or Down key
24
.
.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'REMOVE HS' appears on the display.
.
.
.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'AUTO' appears on the display.
Topcom Butler 4011/4011C Sim
Advertisement
Table of Contents
