Table of Contents
Advertisement
•
When you want to resume the conversation, press the Delete/Mute key
•
The symbol 'X' disappears from the display ( ). The person on the other end of the line
can hear you again.
4.10 Pause key
If you dial a telephone number and you would like to add a pause to this number, press the
Pause key
at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.
4.11 Conference call (two internal DECT handsets and one external caller)
You can have a telephone conversation with one internal and one external caller at the same
time.
•
While on the line with an external caller, press the INT key
•
The external call is now on hold.
•
'INT' appears on the display.
•
Dial the number of the handset you would like to include in the call.
•
Once the handset dialled is answered, keep the '#' key pressed for 3 seconds.
•
'CONFERENCE' appears on the display.
•
Now you are connected to one external and one internal caller (conference call).
4.12 Locating a misplaced handset (paging)
If you cannot find the handset, briefly press the Paging key
All handsets subscribed with the base unit will sound a signal so you can locate the
misplaced handset. To stop the signal, briefly press the Line key
4.13 Using the alphanumeric handset keypad
Use the alphanumeric keypad to type text. To select a letter, press the corresponding key.
E.g. if you press the alphanumeric key '5', the first character (j) appears on the display. Press
it repeatedly to select other characters from this key.
Press the '2' key twice to select the letter 'B'. If you would like to select both 'A' and 'B' after
each other, first press the '2' key once to select 'A', wait 2 seconds until the cursor moves to
the next position and then press the '2' key twice to select 'B'. You can delete characters
mistakenly typed by using the Delete key
deleted. You can move the cursor by pressing the Up and Down keys
The Available characters are depending from which charactertable you have
selected (See "4.14.1 Selecting the character table" on page 15)
Topcom Butler 4011/4011C Sim
on the base unit.
. The character in front of the cursor will be
Topcom Butler 4011/4011C Sim
again.
twice.
on any handset.
.
13
Advertisement
Table of Contents
