Call Duration Indicator On The Display; Turning Off The Microphone (Mute); Pause Key; Conference Call (Two Internal Dect Handsets And One External Caller) - Topcom Butler 4812 USB VOIP User Manual

Topcom telephone user guide
Table of Contents

Advertisement

The Speaker volume for normal calls and PC-calls are independent.
4.8

Call Duration Indicator on the display

As soon as you press the Line key
seconds).
E.g. " 01:20 " for 1 minute and 20 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.9

Turning off the microphone (mute)

It is possible to turn off the microphone during a call by pressing the Delete/Mute key
you can speak freely without the caller being able to hear you.
You are on the phone. The Line/Charge indicator
and the Call symbol
Press the Delete/Mute key
The symbol 'X' appears on the display (
When you want to resume the conversation, press the Delete/Mute key
The symbol 'X' disappears from the display ( ). The person on the other end of the line
can hear you again.

4.10 Pause key

If you dial a telephone number and you would like to add a pause to this number, press the
Pause key
at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.

4.11 Conference call (two internal DECT handsets and one external caller)

You can have a telephone conversation with one internal and one external caller at the same
time.
While on the line with an external caller, press the INT key
The external call is now on hold.
'INT' appears on the display.
Dial the number of the handset you would like to include in the call.
Once the handset dialled is answered, keep the '#' key pressed for 3 seconds.
'CONFERENCE' appears on the display.
Now you are connected to one external and one internal caller (conference call).

4.12 Locating a misplaced handset (paging)

If you cannot find the handset, briefly press the Paging key
All handsets subscribed with the base unit will sound a signal so you can locate the
misplaced handset. To stop the signal, briefly press the Line key
Topcom Butler 4812 USB VoIP
the call duration appears on the display (minutes-
appears on the display.
to turn off the microphone.
).
Topcom Butler 4812 USB VoIP
(LED) on the base unit will blink
again.
twice.
on the base unit.
on any handset.
. Now
13

Advertisement

Table of Contents
loading

Table of Contents