Citizen CBM-270 User Manual page 52

ESC & s
[Function] Defining the download characters
<1B> H <26> H <s> <n> <m> [<a> <p1> <p2> ... <ps×a>] m-n+1
[Code]
[Range] s = 3
32 ≤ n ≤ m ≤ 126
0 ≤ a ≤ 12 (Font A)
0 ≤ a ≤ 9 (Font B)
0 ≤ p1 ... ps×a ≤ 255
[Outline] Defines the font of download characters of alphanumeric characters.
• "s" indicates the number of bytes in vertical direction.
• "n" indicates the start character code and m the end character code. To define only one
• Character codes definable includes 95 ASCII codes in total between 32
• "a" indicates the number of dots in horizontal direction for definition.
• "p" is the data to be defined, which indicate a pattern equal to "a" dot in horizontal
• Download characters thus defined remain valid until redefinition, ESC @ execution, GS *
[Caution] Download characters and download bit images can not be defined simultaneously.
Running this command clears the definition of the download bit image.
[Default] Same as the internal character set
[Example]
Create each data bit by setting "1" for a printed dot and "0" for an unprinted dot.
[Sample Program]
See Sample Program and Print Results for ESC % on Page 36.
n m [a [p] s×a]
character, set n=m.
direction from the left end. The rest of the pattern on the right side is filled with space.
The rest of data to be defined is s x a.
execution, or power OFF is practiced.
m−n+1
[Print Results]
37
CBM-270 User's Manual
∼
126.
CITIZEN