Citizen CBM-270 User Manual page 80

GS ^ n1
[Function] Executing the macro
[Code] <1D> H <5E> H <n1> <n2> <n3>
0 ≤ n1 ≤ 255
[Range]
0 ≤ n2 ≤ 255
0 ≤ n3 ≤ 1
[Outline] Executing contents defined in macro.
• "n1
Continuous execution:
Execution by FEED S:
• When this command is received while in macro definition, suspension of macro definition
[Caution]
• No execution takes place when macro is held undefined or n1=0.
• While in macro execution with n3=1, paper feed with the LF SW is not available.
• Initially, this command is not specified.
[Default]
[See Also] GS :
[Sample Program]
See Sample Program and Print Results for GS : on Page 64.
n2 n3
∼
n3" indicate as follows:
n1 : The number of times of macro execution
n2 : Waiting time on macro execution
Waiting time of n2 × 100 msec is given for every execution.
n3 : Macro execution mode
n3
0 Continuous execution
1 Execution by LF SW
is indicated. At this time, the defined content is cleared.
Mode
The Macro is executed n1 times continuously at the time intervals
specified by n2.
After waiting for lapse of time specified by n2, the ALAME LED
flickers and the LF switch is waited to be pressed. When it is
pressed, the macro is executed once.
This action is repeated n1 times.
[Print Results]
65
CBM-270 User's Manual
CITIZEN