Citizen CBM-270 User Manual page 53

ESC * m n1
[Function] Specifying the bit image mode
[Code] <1B> H <2A> H <m> <n1> <n2> [<d>] k
[Range] m= 0, 1, 32, 33
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 1
0 ≤ d ≤ 255
k = n1 + 256 × n2
k = (n1+ 256 × n2) × 3
[Outline] According to the number of dots specified in n1, n2, specify the bit image of mode n.
• The No. of dots printed is divided by 256, whose quotient is taken as n2 and residualas
• The total no. of dots printed in the bit image is equal to n1 + (256 × n2).
• When bit image data have been input in excess of dot position of one line (448 dots) , the
• d is bit image data, the bits subject to printing are taken as "1" and those not as "0".
• The bit image modes specified by m are shown as follows:
m
0 8-dot single density
1 8-dot double density
32 24-dots single density
33 24-dots double density
• When the values set in m (Bit image mode) are out of the above range, the data following
[Caution]
• After completion of bit image printing, printer returns to normal data processing mode.
[Example]
n2 [ d ] k
n1.
excess data are discarded.
Mode
No. of Dots
after n1 is processed as normal printing data.
(m = 0, 1)
(m = 32, 33)
Vertical Direction
Dot Density
8 67 DPI
8 67 DPI
24 203 DPI
24 203 DPI
38
CBM-270 User's Manual
Horizontal Direction
Dot Density
Max. No. of Dots
101 DPI
203 DPI
101 DPI
203 DPI
192
384
192
384
CITIZEN