Setting Density(Adf); Setting 2In1 Mode - Lanier 5415MFD Operator's Manual

Setting DENSITY(ADF)

Setting 2in1 MODE

Enhanced Programming
Adjust the copy image density level when optional Automatic Document Feeder is
installed. This setting will vary print density according to the type of originals frequently
used.
Setting Description
MODE 1 When the standard original (text original) is used.
MODE 2 To give better reproduction of a faint original.
1
Press the "Program" key 2 times to display the message COPY SETTING.
2
Press "4" of Keypad. A message is displayed briefly to confirm your selection.
3
Press the Arrow keys to select Mode 1 or Mode 2 as the default setting.
Then press "Yes" key.
4
Press "No/Clear" key, to return to the initial state.
Set the initial value of 2in1 function. It is possible to set when additional memory is
installed.
1
Press the "Program" key 2 times then the display appears the message COPY
SETTING.
2
Press "5" of Keypad. A message is displayed briefly to confirm your selection.
3
Press the "Left" or "Right Arrow" keys to select ON or OFF as default setting and
press "Yes" key.
4
Press "No/Clear" key, to return to the initial state.
Copy Setting
Default
*
7 - 9