Program Dial - Lanier 5415MFD Operator's Manual

Dial Registration

Program Dial

The Broadcast, Timer TX, Mailbox TX, Polling RX or Relay Initiate function can be registered in
Program Dial.
Program Dial allows you to transmit a document using a particular transmission function
previously registered. This eliminates job setup for frequently performed tasks.
Program Dial accommodates up to five different transmission functions. "One Touch" keys that
can be used for this purpose are 24, 25, 26, and 27.
Programming a Registered Dial
1
2
3
4
5
6
7
6 - 12
Press the "Program" key 3 times.
The display appears the message DIAL REGISTRATION.
Press '4' of the Keypad.
Press "One Touch" key 24, 25, 26, or 27, whichever you want to program the function in.
For example: Using "One Touch" key 27
Using the following chart, press one number of the Keypad corresponding to the desired
transmission function. Enter the necessary data for the function selected.
To correct or delete the registered contents, press the "No/Clear" key to DELETE or back to
last LCD display.
•
For example: To program Timer TX for Program Dial, press '2' of the Keypad.
•
Enter the data according to the Timer setting procedure.
For example: 12:30. Then press "Yes" key.
•
Use the Keypad to input the Fax number, and then press "Yes" key. Or, use "Function"
utilities.
This completes the programming procedure for Program Dial.
To exit from the registering of Program Dial, press the "No/Clear" key twice.
Keypad
1
2
3
6
7
Transmission Function
BROADCAST
TIMER TX
MAILBOX TX
POLLING RX
RELAY INITIATE
Enhanced Utilities