Setting Originals In The Automatic Document Feeder - Lanier 5415 Operator's Manual

Placing the Original Document

Setting Originals in the Automatic Document Feeder

1
2
3
3 - 2
Adjust the Document Guide Plates to the
size of the document.
Set the document so that the side that
you wish to copy is facing up.
Note: The maximum number of
originals that can be loaded is 50.
Note: Make sure that the top of the
stack does not exceed the
Adjust the Document Guide Plates so that they make contact with the sides of the stack. The
stack may not feed properly if the Document Guide Plates do not secure the stack in place.
mark.
Copier Functions