Before Calling For Service; Data Rating Plate - Thermador PD304 Care And Use Manual

SECTION SEVEN: BEFORE CALLING FOR SERVICE
Before calling for Service, check the following to avoid unnecessary
service charges.
Be sure to check these items first:
Is there a power outage in the area?
Is the household fuse blown or the circuit breaker tripped?
Is the range disconnected from the electrical supply?
IF THE BURNERS DO NOT IGNITE
• Are te burner caps properly aligned and seated in the burner base?
• Are the burner ports clogged?
• Is a fuse blown or is the circuit breaker tripped?
• Is the manual shut-off valve closed, preventing the flow of gas?

DATA RATING PLATE

The data rating plate shows the model and serial number of your range.
It is located behind the toe kick at the bottom of the range. To access
the rating plate, remove the two toe kick attachment screws, then
carefully remove the toe kick panel.
For all models, the data rating plate is found on the component tray
behind the toe kick panel.
The electric wiring diagrams and schematics in the toe kick area should
not be removed.
!
Before removing the toe kick panel, disconnect the range from the
electrical power supply. Reinstall the toe kick panel before recon-
necting the range to the power supply and operating the range.

Before Calling For Service

CAUTION:
PD Data Rating Plate Location
SERVICE INFORMATION
For handy reference, copy the
information below from the data
rating plate. Keep your invoice for
Warranty validation.
Model Number
Serial Number
Date of Purchase
Dealer's Name
Dealer's Phone Number
Service Center's Name
Service Center's Phone Number
Also, enter this information on
the Product Registration Form included
with this product, then mail it to the
indicated address.
Lower front of
range behind
toe kick
43