Advertisement
IMPORTANT PRODUCT INFORMATION
This product combines a room cooler, a humidifier and air cleaner,
which means that it can be used all year round. To obtain the best
cooling effect from your product please read these instructions
carefully.
Your cooler requires a fresh air supply
1) Locate the cooler near an open window or leave the door to the
room open. Then open another outside window or door on the
opposite side of the room, so that you create "flow through"
ventilation. The cooler will not work properly in a closed room.
2) Start your cooler before the air temperature in the room reaches
unacceptable levels. Due to the low running costs of the unit, it
is more effective to leave the unit running during periods of
occupation.
3) Add cold water to the tank. Ice may be added if available. Turn
on the cool switch and the filter pad will become damp. The air
is drawn in through the rear panel and over the filter pad to
release cool clean air. It may take a few minutes for the pad to
become saturated.
If the air becomes too humid you may use the cooler as a simple fan.
This is achieved by turning the cooler on, but not using the cool button
PARTS DESCRIPTION
1 Top cover
2 Handle
3 Horizontal louvres
4 Left side panel
5 Front cover ornament 13 Remote control holder
6 Power cord hole
7 Castors
8 Top cover board
CONTROL PANEL
.
9
Air vent
10 Front cover
11 Water level indicator
12 Remote control
14 Right side panel
15 Water fill cover
16 Drainage point
Advertisement
