Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE GREEN AND YELLOW - EARTH As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1.
Read and save these important safety instructions before using this unit. When using electrical appliances, basic safety precautions should always be followed including the following: Transport & store the unit in an upright position only. Leave it in an upright position for at least 3 hours before first use.
DRAINAGE METHOD 1) Pull out plug and push the nozzle downwards . 2) Connect a suitable hose to the nozzle. 3) Make sure that the hose is not kinked. 4) Only use this feature when permanent drainage is required. Keep the nozzle in its closed position when not in use to avoid leaks.
Page 12
out of hoses as it can unit to not operate inefficiently. not be below the exhaust hose hole on the back of the unit. -10-...
Page 13
bending DO NOT is bent in too many places, it could easily malfunction BEND AS BELOW -11-...
HEATING to be HEATING can set the timer to run the unit for a specified lengh of time and once reached You can set the time between press it again and -14-...
Page 16
or window . Leave Keep to create good ventilation. to effectively cool, close there stop operating and the unit will (HEAT on selected models only) is efficient constant -15-...
Page 26
There are castors in the bottom of the unit, to enable you to easily move the unit location. Before maintenance, please switch off from the control panel and pull out the plug from the power supply, in order to avoid an electric shock. running efficiency , or more frequently is required.
Page 27
Switch off the unit on the control panel and unplug from the power supply Please use a damp cloth with mild detergent to clean the outer unit. Do not use petrol, oil of any other chemicals to clean the unit, as this will damage the unit.
Page 28
If malfunction occurs, please check the following before returning to your retailer. The power supply is not connec- ted well. or plug The power plug is not inserted fuse. tightly. engineer There is a malfunction of the to replace the power socket. power plug or socket.