Related Manuals for Prem-I-Air TC-9000R
Summary of Contents for Prem-I-Air TC-9000R
- Page 1 Mobile Air Conditioner Instruction Manual Model TC-9000R Please read and retain these instructions for future reference...
-
Page 2: Specification
SPECIFICATION Model no. TC-9000R Cooling capacity 8500 BTU 2490 W Heating capacity Power/Ampere consumption for cooling* 830W/ 3.7A Air volume (max. speed) 350 m³/h Humidity removal capacity 1.2 L/hr Power supply 220-240V~, 50Hz Compressor Rotary Refrigerant R410a Fan speed Timer Electronic switch 1 –... -
Page 3: Before Use
BEFORE USE Important Safety Instructions 1. Transport & store the unit in an upright position only. Leave it in an upright position for at least 3 hours before first use. 2. Always place the unit on an even, level surface. 3. - Page 4 PARTS Front Back Control Panel Air filter Air outlet Air inlet Carry handle Exhaust air outlet Caster Cord storage Water stopper / drainage point Accessories 10. Indoor adaptor - for insertion over hose and into back of the air conditioner 11.
-
Page 5: Installation
INSTALLATION Installing the exhaust pipe This unit is a portable air conditioner, which can be moved from room to room. 1. Using the foam strips • These are not suitable for hinged window systems Foam strips • Place the foam window strips against the window. Mark and cut them to size if necessary. •... -
Page 6: Installing The Exhaust Hose
Installing the exhaust hose • Use only the hose provided and clip exhaust hose and unit adaptor to the back of the air conditioner. • Avoid kinks and bends in the exhaust hose as this will cause expelled moist air to build up causing the unit to overheat and shut down. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS For Maximum Efficiency • Close doors and windows. • Keep curtains and blinds closed during the sunniest part of the day. • Regularly clean filters. • Once room has reached the desired conditions, reduce temperature and ventilation settings. Control panel 'Set temperature' indicator 'Room temperature' indicator... - Page 8 Setting ventilation speed Press SPEED button to choose vent speed (high or low). The speed indicator light will indicate which speed setting is in use. If the unit is in AUTO mode, it will choose the ventilation speed automatically according to the ambient temperature (the related indicator light will illuminate), at this time.
- Page 9 DRAINAGE During the process of cooling, some water will be extracted from the air into the unit. If the reservoir is full: On the electronic model both the compressor and motor will stop. The COMP. Indicator will flash to show you. To re-start the unit empty the collected water in one the following ways: Turn off the air conditioner and avoid moving it when full.
-
Page 10: Maintenance
MAINTENANCE Always switch off and unplug the air conditioner from the mains before cleaning. To maximize the efficiency of the air conditioner clean regularly. Cleaning the housing Use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These could all damage the unit casing. -
Page 11: Bs Plug Wiring
BS PLUG WIRING Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains lead are coloured in accordance with the following code : BLUE - NEUTRAL BROWN - LIVE GREEN AND YELLOW - EARTH As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. -
Page 12: Service And Warranty
SERVICE & WARRANTY • Do not operate the unit with a damaged cord or plug, after the unit malfunctions, has been dropped or damaged. • For your convenience, record the complete model number and product name (located on the Product Identification Plate), the date you purchased the product, and attach your purchase receipt as proof of purchase.