Sla - THOMSON SpeedTouch 605 User Manual

5.2.9 SLA

Overview
Ping
Add/delete a ping test
Modify ping test
properties
E-DOC-CTC-20050429-0104 v1.0
The Service Level Agreement (SLA) page allows you to view and configure ping
and traceroute tests.
The page contains two sections:
Select to view/configure and perform ping tests.
Ping
Select to view/configure and perform traceroute tests.
Traceroute
The Ping table provides a list of configured ping test entries.
By default no ping tests are configured. To add a ping test see
test.
Select a ping test entry to:
Modify ping test properties.
Perform a ping test and view test results and history (see
results).
Delete the entry (see Add/delete a ping
To add a ping test entry:
Click New (if an entry is currently selected, click Cancel first).
1
Type a name for the ping test entry.
2
Type the host name or IP address of the target to ping.
3
Click Apply.
4
To delete a ping test:
Select the ping test entry to delete.
1
Click Delete.
2
To modify a ping test entry:
Select the ping test entry.
1
Click Modify.
2
Make your changes.
3
Click Apply to apply your changes to the ping test entry.
4
Add/delete a ping
Ping tests and
test).
Chapter 5
Expert Configuration
119