Power Supply; Power Supply Specifications; Recommended Power Cord - Sony PFV-L10 Installation Manual

Interface unit
Hide thumbs Also See for PFV-L10:
Table of Contents

Advertisement

1-3. Power Supply

1-3. Power Supply

1-3-1. Power Supply Specifications

Power voltage
AC 100 V to 240 V
Power frequency
50 Hz or 60 Hz
Max. 13 A, +5 V/DC
Power consumption
(With the optional boards installed)
Rush current
AC 120 V IN : 20 A
AC 240 V IN : 55 A
n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.
1-2 (E)

1-3-2. Recommended Power Cord

This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
. Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
. Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
. Never use an injured power cord.
For customers in the U.S.A. and Canada
Required Part
1 Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11
For customers in the United Kingdom
Required Part
2 Power cord, 250 V 10 A (2.4 m) : ! 1-782-929-21
1
2
If the unit is used in the area except above, please contact
your local Sony Sales Office/Service Center.
AC Inlet
(Main unit)
AC Inlet
(Main unit)
PFV-L10

Advertisement

Table of Contents
loading

Table of Contents