1-1. Installation Procedure
The installation procedure of PFV-L10 is as shown in the
following flowchart.
Refer to the each item in this manual for details.
Start
Determining the Location of Installation
1-2. Operating Environment
1-3. Power Supply
1-4. Installation Space
Installing the Optional Board
1-5. Installing Optional Board
Rack Mounting
1-6. Rack Mounting
Connection
End
PFV-L10
Section 1
Installation
1-2. Operating Environment
Operating temperature
Performance temperature
Humidity
Mass:
To prevent overheating of PFV-L10, ensure that there is
good air circulation around the unit.
n
Install in a stable location.
Installation on unstable or tilting surface may cause the
unit fall off, resulting in injury.
5 dC to 40 dC
10 dC to 35 dC
10 to 90 % (No condensation)
Approx. 7 kg
(Without the optional board)
1-1 (E)