Viewfinder Adjustment; Tripod Mounting - THOMSON HP 270 User Manual

Power
Switch
Lock Button
PAUSE
Dioptre Adjustment
Control

Viewfinder Adjustment

1
Set the Power Switch to "
down the Lock Button located on the switch.
2
Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.

Tripod Mounting

1
Align the screw on the tripod with the camera's
mounting socket. Then tighten the screw.
•Some tripods are not equipped with studs.
CAUTION:
When attaching the camera to a tripod, extend its
legs to stabilise the camcorder. It is not advised to use
small sized tripods. This may cause damage to the
unit by falling over.
11
EN
" or " " while pressing