ZyXEL Communications ZyWall 110 User Manual page 1037

I uploaded a logo to display on the upper left corner of the Web Configurator login screen and
access page but it does not display properly.
Make sure the logo file is a GIF, JPG, or PNG of 100 kilobytes or less.
I uploaded a logo to use as the screen or window background but it does not display properly.
Make sure the logo file is a GIF, JPG, or PNG of 100 kilobytes or less.
The Zyxel Device's traffic throughput rate decreased after I started collecting traffic statistics.
Data collection may decrease the Zyxel Device's traffic throughput rate.
I can only see newer logs. Older logs are missing.
When a log reaches the maximum number of log messages, new log messages automatically overwrite
existing log messages, starting with the oldest existing log message first.
The commands in my configuration file or shell script are not working properly.
• In a configuration file or shell script, use "#" or "!" as the first character of a command line to have the
Zyxel Device treat the line as a comment.
• Your configuration files or shell scripts can use "exit" or a command line consisting of a single "!" to
have the Zyxel Device exit sub command mode.
• Include write commands in your scripts. Otherwise the changes will be lost when the Zyxel Device
restarts. You could use multiple write commands in a long script.
Note: "exit" or "!'" must follow sub commands if it is to make the Zyxel Device exit sub
command mode.
See Chapter 46 on page 982
I cannot get the firmware uploaded using the commands.
The Web Configurator is the recommended method for uploading firmware. You only need to use the
command line interface if you need to recover the firmware. See the CLI Reference Guide for how to
determine if you need to recover the firmware and how to recover it.
Chapter 50 Troubleshooting
for more on configuration files and shell scripts.
ZyWALL USG Series User's Guide
1037