Ttaching The Ustomer Upplied Ens - GE KTC-XP1 User Manual

Installation
2.3 A
TTACHING THE
Note: For optimal performance, use an autoiris lens.
Refer to the instructions that came with the lens you purchased for
complete installation instructions of the lens.
In general, see Figure 4 and perform the following:
Video-type Pins for
autoiris solder side
lens leads: of lens plug
Red (9 VAC)
NC
(no connection)
Black (ground)
White (video)
Camera
Figure 4. Attaching the customer-supplied lens
1) If you are using a C-mount lens, screw on the provided C-mount
adapter.
2) Screw the customer-supplied lens to the camera.
3) If you are using an autoiris lens, insert the autoiris lens plug into the
autoiris lens connector.
8
C
USTOMER
C-mount adapter
(for C-mount lenses only)
Autoiris lens Autoiris lens
connector plug
KTC-XP1 UltraView Camera
-S L
UPPLIED ENS
Pins for
solder side
of lens plug
(autoiris lens shown;
a manual iris lens has no cable)
1047441A / February 2004
DC-type
autoiris
lens leads:
Damping coil (+)
Damping coil (–)
Driving coil (+)
Driving coil (–)
Lens