Ptz - GE KTC-XP1 User Manual

Programming
3.2.5

PTZ

The camera provides a digital PTZ (pan/tilt/zoom) of 1X – 4X.
To access the digital PTZ menu:
At the Main Menu, use the up and
down buttons (
the PTZ option, then press the
center selection button (
To adjust the PTZ limits:
At the PanTiltZoom menu, use the
up and down buttons (
move between the zoom, pan,
and tilt scales and use the right
and left buttons (
the markers on the scales.
Note: Observe the results on the monitor screen for the best settings.
Note: On the zoom scale, 1 is 1X digital zoom and 10 is 4X digital zoom. The pan and tilt
settings are dependent on the zoom setting and range from –100 to +100. If zoom is set to
1 (1X digital zoom), the pan and tilt settings have no effect.
Move to the PREVIOUS PAGE option and press
menu.
20
) to move to
).
) to
) to adjust
KTC-XP1 UltraView Camera
MAIN MENU
CAMERA SETUP.
WHITE BALANCE
LOCATIONS
PTZ.
EXIT
PanTiltZoom MENU
Zoom
1
Pan
-100
Tilt
-100
PREVIOUS PAGE...
(Zoom default is 1; pan default is 0;
tilt default is 0.)
to leave the current
1047441A / February 2004
ATW
GENERAL
SAVE CHANGES.
6 10
30 100
0 100