Main Menu; Camera Setup - GE KTC-XP1 User Manual

KTC-XP1 UltraView Camera
3.2.1 M M
AIN ENU
Camera Setup menu
White Balance
Locations
PTZ
Exit
3.2.2 C
AMERA
Use these menus to configure signal format (NTSC/PAL), camera ID
(i.e., title), iris settings, synchronization mode, and gain control.
To access the Camera Setup
menu:
At the Main Menu, use the up and
down buttons (
the Camera Setup menu and
access it by pressing the center
selection button (
1047441A / February 2004
Use these menus to configure signal format
(NTSC/PAL), camera ID (i.e., title), iris
settings, synchronization mode, and gain
control. See section 3.2.2 Camera Setup.
Use this menu to adjust the white balance.
See section 3.2.3 White Balance (ATW,
ATW-WIDE, HOLD).
Use this menu to program presets. See
section 3.2.4 Locations.
Use this menu to control the camera's digital
PTZ functions. See section 3.2.5 PTZ.
Use this option to exit the OSD programming
menus. See section 3.2.6 Exiting with Saving
or Canceling Changes.
S
ETUP
) to move to
).

MAIN MENU

CAMERA SETUP.

WHITE BALANCE
LOCATIONS
PTZ.
EXIT
Programming
ATW
GENERAL
SAVE CHANGES.
11