Setting The Lens Mode And Adjusting The Defaults - GE KTC-XP1 User Manual

KTC-XP1 UltraView Camera
a) Move to the ID DISPLAY option and toggle between the OFF
and ON options. Leave the desired option displayed. ON
displays the camera ID on the monitor screen.
b) Move to the CAMERA ID option and press the center selection
button (
buttons to scroll through the alphanumeric characters for the
first and following positions of the label. Press the center
selection button (
next character position.
Note: You can hold the
Note: To change a character that is already saved, leave and reenter the
CAMERA ID option, press the center selection button (
characters that you wish to remain as they are, and when you have highlighted
the character to be changed, make the change, save it, and finish saving the
remaining characters in the camera title.
c) Move to the ID POSITION option and toggle between the
position options. Leave the desired option displayed.
d) Move to the ID BACKGROUND option and toggle between the
background options. Leave the desired option displayed.
e) Move to the PREVIOUS PAGE option and press
the Camera Setup menu.
3.2.2.3 S
ETTING THE
While the lens-mode DIP switch sets the camera's circuitry for controlling
the lens, the light control menu options set the camera's programming.
For autoiris lenses, the circuitry and programming must be set to the
same setting. In the programming, AIS includes both DIP switch settings
(DD and VD). Manual-iris lenses have no DIP switch setting.
Lens-mode settings (i.e., light-control settings in the programming):
•
AIS for autoiris lenses without amplifier (i.e., DC-type lenses) and
autoiris lenses with built-in amplifier (i.e., video-type lenses)
Note: Specify DD or VD using the lens-mode DIP switch. See section 2.2 Setting the
Lens-Mode DIP Switch.
•
AES for manual-iris lenses
1047441A / February 2004
) to access the 12-character label. Use the OSD
) to save each character and move to the
and
L M
ENS ODE AND
buttons for continuous scrolling.
A D
DJUSTING THE
Programming
) for all leading
to return to
EFAULTS
13