GE KTC-XP1 User Manual page 2

© 2004 GE Security
All Rights Reserved.
Any GE Security software supplied with
GE Security products is proprietary and
furnished under license and can be used or
copied only in accordance with the terms of
such license.
This document contains proprietary
information that is protected by copyright.
No part of this document may be
reproduced or transmitted in any form or by
any means without the prior written
permission of GE Security.
The information contained in this document
is subject to change without notice.
GE Security, in keeping pace with
technological advances, is a company of
product innovation. Therefore, it is difficult
to ensure that all information provided is
entirely accurate and up-to-date.
GE Security accepts no responsibility for
inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks,
personal or otherwise, incurred as a
consequence, directly or indirectly, of the
use or application of any of the contents of
this document.
For the latest product specifications, visit
GE Security online at www.gesecurity.com
or contact your sales representative.
For technical support before and after installation, call 800-469-1676.
Technical support is available 24 hours a day, 7 days a week.
Call: Tech Support
Tech Support
Main
Fax: Tech Support
Main
Web: www.gesecurity.com
1047441A / February 2004
800-469-1676 (6 A.M. – 5 P.M. PST Monday through Friday)
541-740-3589 (all other times)
800-343-3358 or 541-754-9133
541-752-9096 (available 24 hours a day)
541-754-7162
This equipment has been tested and
found to comply with the limits for a
Class A digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may cause
harmful interference to radio
communications.
You are cautioned that any changes or
modifications not expressly approved
by the party responsible for compliance
could void the user's authority to
operate the equipment.