Assembly And Product Model Setup; Assembly; Setup - Star Trac E Series Operation Manual

Embedded display, treadmill, bikes, total body trainer, stepper

Hide thumbs Also See for E Series:

Table of Contents

All manuals and user guides at all-guides.com

Assembly & Product Model Setup

To install the Embedded Display on an E-TRe or E-TRxe, refer to document 620-7854.

To install the Embedded Display on an E-UBe, E-RBe, E-TBTe or E-STe, refer to document 620-7855.

After powering the unit for the first time, the computer will boot up and the

Maintenance Mode screen will appear in the display. If for any reason the

Maintenance Mode Screen does not appear, press and hold "VOL +, CH/

TRK +, and 3" simultaneously.

To complete the setup, follow this steps:

1. Enter the Managers Password (218) to gain access to the Product Selection screen.

2. Select the Product you are setting up (E-TRe or E-TRxe, E-UBe, E-RBe, E-TBTe or E-STe)

3. Once a model is selected, the Maintenance Mode screen will appear.

Continue on next page

Table of Contents

Show Quick Links

Table of Contents

E-trxe E-tre E-ube E-tbte E-ste E-rbe