Center Console Keypad; Heart Rate Bar - Star Trac E Series Operation Manual

CENTER CONSOLE KEYPAD:

Q S Key: Starts the QUICK START program using a
UICK TART
default weight of 155 pounds or 70 kilograms for metric
units and a default time of 20 minutes.
Note: on treadmills, the running belt would start mov-
ing after a 3 seconds countdown.
S / P Key (Treadmills only): Pauses the treadmill
TOP AUSE
when pressed once. Ends the current program when
pressed twice.
C S :
HANNEL ELECT
VOL Key: Allows you to adjust the volume up by
•
pressing the VOL + or down by pressing the VOL - .
CH/TRK: On TV mode, allows you to change the TV channel up by pressing the CH/TRK + or down
•
by pressing the CH/TRK -. On audio mode, allows you to select the next track by pressing the CH/
TRK + or the previous track by pressing the CH/TRK -.
Numeric Keypad: Allows you to enter specific values for selecting a TV channel. Enter the desired
•
value and press OK to accept the value. To return to the previous channel, press
INPUT: Allows you to toggle between TV, iPod or USB modes.
•
TV Power: Press
•
HEART RATE BAR E-TRxe:
I Keys: Adjust incline in 0.5% increments.
NCLINE
To increase or decrease incline, press the
or keys, respectively, until the de-
sired incline appears on the screen. These keys repeat when pressed and held.
S / P Key: Pauses the treadmill when pressed once. Ends the current program when pressed twice.
TOP AUSE
This key also serves as a safety stop reset bottom (see Treadmill Safety Stop).
S Keys: Adjust running belt speed in 0.1 mph (or 0.1 kph) increments. To increase or decrease speed,
PEED
press the or
repeat when pressed and held.
HEART RATE E-TRe:
S / P Key: Pauses the treadmill when pressed
TOP AUSE
once. Ends the current program when pressed twice.
S S R : Resets the safety stop switch (see
AFETY TOP ESET
Treadmill Safety Stop).
All manuals and user guides at all-guides.com
to turn the entertainment functions On or OFF.
keys, respectively, until the desired speed appears on the screen. These keys
11