In And Out Marks - Tascam D00871320A Owner's Manual

To move to a location mark
briefly press and release the
or next mark in the song. This works while playing back, while
stopped or "winding", but not while recording.
5
Alternatively, press and hold the
show the location mark list:
Use the jog wheel to choose a mark (they're listed in the order they
appear in the song) and press
To delete a location mark
the mark you want to delete (or a little after). Press and hold down the
key and press the
SHIFT
To edit a location mark
location mark, you can change the time of the mark.
1
Press and hold the
LOCATE
tion mark list.
2
Use the jog wheel to select a mark and press the
it.
3
Use the wheel to move the mark backwards and forwards by 1/10
frame (the rightmost digit of the number). You can't move a mark for-
ward past the next mark in the list, or backwards to before the previous
mark in the list.
4
Press when done (to return to the home screen) or
ENTER
return to the mark list).

IN and OUT marks

These marks are used for setting the points at which automated punch recording
starts and ends and for repeat playback, as well as for track editing. You can set
these marks while playing back, recording, or while playback is stopped.
Set IN and OUT marks by pressing and holding the
pressing ( ) or
IN SET IN
Locate to the IN and OUT points by simply pressing
Fine-tune the position of the IN and OUT points by pressing and
holding and pressing
SHIFT
Edit the point, to 1/10 frame accuracy, using the cursor keys and the
jog wheel, in the same way as for direct location ("Direct location" on
page 28).
Press when done.
ENTER
Press and hold the
or key to move to the previous
REW F FWD
key for about a second to
LOCATE
to jump to that mark.
ENTER
Stop playback (or recording) and locate to
( ) key.
INSERT DELETE
If you made a mistake when you entered a
key for about a second to show the loca-
( ) at the appropriate points.
OUT SET OUT
(
TRACK EDIT POINT EDIT
Advanced techniques
key, and
LOCATE
cursor key to select
they appear in the song, not by
number.
3.3 milliseconds
(to
EXIT
key and
SHIFT
(along with the TO mark, which is
and .
IN OUT
set and used in the same way)
when performing track editing func-
):
tions.
TASCAM DP-01 Owner's Manual
You can't undo this.
This is sometimes
called "trimming".
The marks are
shown in the order
1/10 frame is 1/300
of a second—about
IN and OUT marks
are also used
29