Punch Recording; Pre-Roll And Post-Roll Times - Tascam D00871320A Owner's Manual

Punch recording

When you have rehearsed your punch-in, you can start recording.
1
Press the key so that the indicator goes out (but the
RHSL
indicator is still lit).
PUNCH
2
Press so that playback starts. Use the pre-roll time to get ready to
PLAY
record.
At the punch-in point, the DP-01 goes into record mode (the
indicator lights).
At the punch-out point, recording stops (the
out), and playback continues until the post-roll point and then returns
to the pre-roll point. The
track arming status stays the same).
If you want to re-record the punch, turn
recording again.

Pre-roll and post-roll times

The pre-roll and post-roll times can be set to suit your style of play-
ing.
1
Press and scroll down to
MENU
2
Use the cursor keys to move the cursor to the
and use the jog wheel to set the value in seconds.
3
Use the cursor keys to move down to the
use the jog wheel to change the value.
4
Press when you're done, so that you can start using these settings.
EXIT
RECORD
indicator is turned off (the
AUTO PUNCH
AUTO PUNCH
and press the
PREFERENCE
(pre-roll time) item,
Pre
(post-roll time) item and
Post
Advanced techniques
AUTO
RECORD
indicator goes
back on before
key.
be set between 1.0 seconds and
9.9 seconds in 0.1 second steps
TASCAM DP-01 Owner's Manual
The pre-roll and
post-roll times can
33