Startup & Shutdown; Starting Up The Dp-01; Figure 1.1: Power Connections To The Dp-01 - Tascam D00871320A Owner's Manual

Startup & shutdown
Read this section to understand how to power up and power down
the DP-01.

Starting up the DP-01

With the DP 01's rear panel power switch OFF, connect the power adaptor
to the DP 01, the power cable to the power adaptor, and the power cable to
the power supply.

Figure 1.1: Power connections to the DP-01

Switch on the DP-01 using the rear panel switch.
The DP-01 display shows a welcome message.
The system is loaded, and the last saved song is then loaded. The
indicator lights to show the hard disk is in use while the song
ACCESS
is being loaded, and the display shows the current operation.
When the
ACCESS
screen":
light goes off, the display shows the "home
Starting out with your DP-01
we suggest that you turn down the
volume of any speakers or amplifi-
ers connected to the unit. Also, do
not wear headphones connected to
the DP-01 when switching power
on or off. This will avoid damage to
speakers, etc. and possible dam-
age to your hearing.
operations by repeatedly pressing
the
EXIT
TASCAM DP-01 Owner's Manual
When switching the
DP-01 on and off,
You can reach this
screen from most
key.
11