Connector Panel; Time Code In Connector - Sony SR-R1000 Operation Manual

Connector Panel

Port A
Port B
Port C
Port D
* At the time of shipment from the factory, no boards are
connected to ports A to C.
An output board is connected to port D.
A Input/output ports
There are the four ports A to D, and an input board or
output board can be connected to each of them. At the time
of shipment, an output board is connected to port D.
Explanations in this operation manual use the
configuration example of input boards (SRK-R201)
HD Input board (SRK-R201)
a HD SDI INPUT A/B connectors
Input the HD SDI video/audio signals.
b HD SDI INPUT MONITOR A/B/MULTI
connectors
Output the input signals for a monitor.
Superimpose and output time data signals from MULTI
connectors when ALT/[F10] (CHAR ON) in the TC menu
is set to On.
Memo
Output signal from MULTI connectors may differ from the
input signal format as follows.
• They will output according to ALT/[F8] (MONITOR
SETTING) in the VIDEO menu when the input signal is
a 3D signal (dual-stream).
A Input/output ports (see page 17)
B Remote input/output
section (see page 18)
connected to ports A and C and output boards (SRK-R202)
connected to ports B and D.
• They will output in 3G when the input signal is 1.5G
• Audio and TC are not superimposed.
• A signal is not output for double speed input.
c TIME CODE IN connector
Inputs a time code generated by an external device.
d TIME CODE OUT connector
When the time code generator is synchronized to the
external time code signals input via the TIME CODE IN
connector, this outputs the external time codes input via
the TIME CODE IN connector according to the ALT/[F3]
(TC OUT) button setting in the TC menu.
Outputs generated time code signals when the internal time
code generator is generating time codes.
C Analog output/power supply
section (see page 19)
Dual Link (4:4:4 or 4:2:2/1080P).
17
Connector Panel