Sony SR-R1000 Installation Manual page 36

Ejecting memory card manually
1. Insert a screwdriver or the like with a diameter of 1
mm or less straight into the hole to the right of the
memory card slot.
n
Do not insert a screwdriver or the like more than 16
mm from the slot panel.
Screwdriver Screwdriver
or the like or the like
n
If the memory card can not be ejected by the operation in
step 1, operation in step 2 is necessary.
2. Hook a fl at-blade screwdriver or the like to the slot
(width: 4 mm) at the front of the top surface of the
memory card and pull the memory card in the arrow
direction.
n
Be careful not to damage the memory card.
Flat-blade screwdriver Flat-blade screwdriver
or the like or the like
Memory card Memory card
1-28 (E)
Hole Hole
Slot Slot
SR-R1000