Purpose of this manual
Related manuals
Trademarks
SR-R1000
Manual Structure
This manual is the installation manual of Memory Storage Unit SR-R1000.
This manual is intended for use by trained system and service engineers,
and provides the information that is required to install (operating environment,
installation space, connection information, initial setting, etc.) and the setting check
sheet.
Besides this Installation Manual, the following manuals are prepared for SR-R1000.
. Operation Manual (PDF) (Supplied with this unit. (CD-ROM))
This manual describes the application and operation of this unit.
. Maintenance Manual (Available on request)
Volume 1: Service Instruction
Volume 2: Parts List, Block Diagrams, and Board Layouts
Volume 3: Schematic Diagrams
These manuals describe the maintenance and service information (service over-
view, error message, detailed parts list, block diagrams, board layouts, schematic
diagrams, etc.) for this unit.
. Protocol Manual of Remote (9-pin) Connector (Available on request)
This manual explains the protocol for controlling this unit via the RS-422A (9-pin
serial remote).
Trademarks and registered trademarks used in this manual are follows.
. Ethernet is a registered trademark of Xerox Corporation.
3 (E)