Sony SR-R1000 Installation Manual page 14

Specifi ed Rack Mount Kit
RMM-131 (Optional accessory)
The RMM-131 Rack Mount Kit is for mounting equip-
ments in a standard EIA 19-inch rack.
Size limits on applicable equipment
. Maximum weight: 40 kg
. Maximum width: 427 mm
. Height:
4U (approximately 176 mm)
Applicable rack
Racks with a depth of 660 to 830 mm (22-inch rails).
Parts Packed in RMM-131
. Slide rail :
. Rack angle (handle) :
. Rail brackets :
. Plate nut (large) :
. Plate nut (small) :
. Screw (B4 x 8) :
. Hexagon socket head cap screw : 8 pcs
. Flat washer :
. Screw (RK5 x 14) :
. Decorative washer :
. Cap :
. L-shaped hexagonal wrench :
1-6 (E)
2 pcs
2 pcs
4 pcs
4 pcs
4 pcs
8 pcs
8 pcs
2 pcs
2 pcs
2 pcs
1 pc
Rack Mounting Procedure
Removing legs
1. Place the unit with its side panel down.
2. Remove the four screws to detach the legs from the
bottom plate of the unit.
3. Place the unit horizontally.
Legs Legs
PS4 x 20 PS4 x 20
n
Keep the removed screws and legs in a safe place.
When using this unit outside the rack, be sure to reattach
the legs.
Tightening torque: 98 x 10
Legs Legs
PS4 x 20 PS4 x 20
N . m {10 kgf . cm}
_2
SR-R1000