Sony SR-R1000 Installation Manual page 17

15. Check that the right and left middle rails are attached
in parallel.
Middle rails Middle rails
Distance: A = A' =416 mm Distance: A = A' =416 mm
16. Tighten the eight hexagon cap screws with a hexagon
wrench to secure the right and left rails that are at-
tached temporarily to the rack in step 12.
SR-R1000
A A
A' A'
Mounting the unit on the rack
c
Be sure to perform this mounting work with two or more
persons.
17. Shift the ball retainers of the right and left middle rails
in the arrow direction.
Ball retainer Ball retainer
18. Extend the right and left middle rails to the same
length.
19. Hold the handles and lift the unit and insert the inner
rails slowly into the middle rails.
20. Push the unit slowly into the rack while pressing the
right and left stoppers.
c
Be sure to perform this work with two or more per-
sons.
Stopper Stopper
Unlock button Unlock button
n
When the unit is fully pushed into the rack, the lock mech-
anism is activated and the unit can no longer be pulled out.
To pull out the unit in this state, pull it out while pressing
the unlock buttons on the rack angles.
Middle rail Middle rail
Middle rail Middle rail
Stopper Stopper
Inner rail Inner rail
Unlock button Unlock button
1-9 (E)