Chicco Fit 4 User Manual page 63

BOOSTER MODE INSTALLATION
Use of LATCH and Top Tether in BOOSTER MODE is completely optional. If LATCH and Tether
is not used, make sure the LATCH and Tether Straps are properly stored. See page 22.
If using LATCH and Top Tether, locate the Tether compartment (see page 76) and
LATCH Connector Storage compartment (see page 80) and remove the straps.
5 Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars.
6
Pull up on the end of the LATCH Adjuster strap (Pull 1st) until strap is tight.
7
Pull on the SuperCinch® LATCH Tightener strap (Pull 2nd) to secure Child
Restraint.
8
Locate the Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
If the seat is not secured with both the LATCH anchors and Top Tether, the seat
must be secured with the vehicle Lap-Shoulder belt when not in use.
122
BOOSTER MODE INSTALLATION
8
PULL
1
st
PULL PULL
1 2
st nd
"CLICK"
PULL
5
1
"CLICK"
6
PULL PULL
1 2
st nd
PULL
2
nd
7
PULL
2
st nd
123