Stage 1 Positioner - Chicco Fit 4 User Manual

STAGE 1 POSITIONER

WARNING - ONLY use the Stage 1 Positioner if the child
weighs between 4 and 16 lbs (1.8 and 7.3 kg).
WARNING - Stage 1 & 2 Headrest and Stage 2 Positioner
must be in place when the Stage 1 Positioner is used.
To ensure a better fit for smaller infants the Stage 1 Positioner may be needed.
Do NOT use any other infant insert or pillows. Only use those provided by
Chicco for this Child Restraint.
1
Pull both Harness Straps over the side panels of Stage 1 Positioner.
2 Push Stage 1 Positioner firmly into Child Restraint to make sure it is properly
positioned.
3 Lift up on the Stage 1 Positioner and pull Crotch Strap Pad through slot (a).
Thread the Harness Buckle up through the slot in the Stage 1 Positioner and
Crotch Strap Pad (b). Make sure the fabric flairs are tucked under the slot of
the Stage 1 Positioner.
38
STAGE 1 POSITIONER
1
2
3a 3b
39