Chicco Fit 4 User Manual page 41

FORWARD-FACING SETUP
4 Place Child Restraint facing forward on selected vehicle seat. Make sure
it is not blocking the vehicle belt buckle. Lay Tether Strap over the back
of the vehicle seat. Push the Child Restraint back until it touches the
vehicle seat back and make sure the base stays flat on the vehicle seat.
Installation on a Level Surface: Locate the Bubble Level Indicator
5
label and re-adjust the seat recline to any position that the Bubble
LEVEL falls between the lines for
Installation on a Slope: If vehicle is on a slope adjust the seat
recline to position 8 or 9 ONLY.
LEVEL
Installation Options:
• LATCH installation continued on page 80.
• Lap-Shoulder Belt installation continued on page 86.
• Lap Belt Only installation continued on page 92.
78
STAGE 3 FORWARD-FACING installation.
FORWARD-FACING SETUP
4
5
L E V E L
L E V E L
5 Stage 3
79