Problem solving guide
Problem
1 and a number, e.g. 1-0
flashes alternately with
a 3 digit number in the
timer display.
In the timer display
flashes alternately with
numbers.
38
Cause and remedy
Heating element malfunction
Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
If the problem persists after power has been re-
stored, please contact Miele Service.
The overheating protection mechanism has been ac-
tivated.
See "Overheating protection".
, or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault code continues to appear in the dis-
play, contact Miele Service.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
If the problem persists after power has been re-
stored, please contact Miele Service.