Table of Contents
Advertisement
Timer
Switching off the heating ele-
ment/cooking zone automatic-
ally
You can set a time after which the heat-
ing element/cooking zone will turn off
automatically. This function can be
used on all heating elements/cooking
zones at the same time.
The switch-off time is set on the nu-
merical keybank for the heating ele-
ment/cooking zone that you want to
switch off automatically.
If the time programmed is longer than
the maximum operational time al-
lowed, the heating element/cooking
zone is switched off by the safety
switch-off (see respective section).
Select a power level for the desired
heater element/cooking zone.
Touch the sensor control.
The indicator light will start to flash.
Set the desired time.
If you want to set a switch-off time for
another heating element/cooking
zone, follow the same steps as de-
scribed above.
If more than one switch-off time is
programmed, the shortest time re-
maining will be displayed, and the cor-
responding indicator light will flash.
The other indicator lights will light up
constantly.
24
If you want to show the remaining
times counting down in the back-
ground, touch the sensor control
repeatedly until the indicator light for
the required heating element/cooking
zone flashes.
Changing the switch-off time
Touch the sensor control re-
peatedly until the indicator light for
the required heating element/cooking
zone flashes.
Set the desired time.
Deleting the switch-off time
Touch the sensor control re-
peatedly until the indicator light for
the required heating element/cooking
zone flashes.
Touch the 0 sensor control on the nu-
merical keybank.
Advertisement
Table of Contents
