Siemens SINUMERIK 802C Manual page 11

S
Toolbox
– WinPCIN transfer program for a PC/PG (programming device) to transfer user data and
programs
– Text manager
– Cycle kit for loading into the control system using WinPCIN
– User program library
– Technological machine data files
– Programming tool
S
Update diskettes
– Update program with operator prompting system
– 802C system software, packed, for loading and programming the
SINUMERIK 802C via an update program.
User data
User data are:
S
Machine data
S
Setting data
S
Tool data
S
R parameters
S
Zero offsets
S
Compensation data
S
Part programs
S
Standard cycles
Data saving
Modified user data are saved for at least 50 h after power off or power failure. After then, they
might get lost.
Warning
!
To avoid data loss, the operator must carry out data saving (see Section 4.1.4).
SINUMERIK 802C
6FC5 597–3AA20–0BP2 (01.02)
SINUMERIK 802C Control System
1.1 Components of the SINUMERIK 802C
1-11