NordicTrack SE 3i User Manual page 16

CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button.
As you exercise, the console will provide continu-
ous exercise feedback. You can even measure your
heart rate using a compatible heart rate monitor. See
page 21 for information about purchasing an
optional chest heart rate monitor.
You can also connect your tablet to the console and
use the iFit –Smart Cardio Equipment app to record
®
and track your workout information.
Barney
ELNE57019
NTEVEL57019
The console also offers a selection of onboard
workouts. Each workout automatically changes the
resistance of the pedals as it guides you through an
effective workout.
You can even listen to your favorite workout music or
audio books with the console sound system while you
exercise.
To use the manual mode, see this page. To use an
onboard workout, see page 18. To connect your
tablet to the console, see page 19. To connect
your heart rate monitor to the console, see page
20. To use the sound system, see page 20.
To connect to the sound system with Bluetooth,
see page 20. To change console settings, see
page 21.
Note: If there is a sheet of plastic on the display,
remove the plastic.
Note: The console can display speed and distance in
either standard units or metric units. To change the unit
of measurement, press the St/Met button repeatedly.
For simplicity, all instructions in this section refer to
standard units.
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Select the manual mode.
Press the Manual Control button to select the
manual mode.
3. Change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons or by pressing one of the numbered
Resistance buttons.
Note: After you press a button, it will take a
moment for the pedals to reach the selected
resistance level.
16