NordicTrack SE 3i User Manual page 13

16. Attach the Tablet Holder (93) to the Console (5)
with four M4 x 16mm Machine Screws (94); start
all the Machine Screws, and then tighten
them.
17. Plug the Power Adapter (90) into the receptacle
on the frame of the elliptical.
Note: To plug the Power Adapter (90) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 14.
18. Make sure that all parts are properly tightened. Place a mat beneath the elliptical to protect the floor. Extra
parts may be included.
16
5
17
13
93
94
90