Sony XDCAM XDJ-1000 Installation Manual page 3

When installing the installation space must be secured
in consideration of the ventilation and service operation.
. Do not block the ventilation slots at the inside of
handles on the BIN panels, and vents of the fans.
. Leave a space around the unit for ventilation.
. Leave more than 40 cm of space in the rear of the unit
to secure the operation area.
When the unit is installed on the desk or the like, leave
at least 4 cm of space in the left and right sides.
Leaving 40 cm or more of space above the unit is
recommended for service operation.
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
make sure that the rack does not overload the supply
circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confi rm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specifi ed limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please
make sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the specifi cations of the Operation Manual
6. When performing the installation, keep the fol-
lowing space away from walls in order to obtain
proper exhaust and radiation of heat.
Top: 4 cm (1.6 inches) or more
Right, Left: 4 cm (1.6 inches) or more
Rear: 10 cm (4 inches) or more
XDJ-1000
Laser Diode Properties
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
This XDJ-1000 are classifi ed as a CLASS 1
LASER PRODUCT.
This label is located on the top cover of the drive unit.
.
Wavelength: 400 to 410 nm
Emission duration: Continuous
Laser output power: 280 mW (max. of
pulse peak), 150 mW (max. of CW)
Standard:
1 (P)