Adjusting The Headlight Range; Changing The Combination Instrument Battery - KTM 250 EXC TPI Owner's Manual

15 ELECTRICAL SYSTEM
15.11
15.12
128

Adjusting the headlight range

V00369-10

Changing the combination instrument battery

E00901-10
V00371-10
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
» If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Loosen screw .
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
If you have a payload, you may have to correct the
headlight range.
–
1
Tighten screw .
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws .
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
wise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label facing
outward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
p. 128)
p. 127)
p. 125)
2
all the way counterclock-
3
.
p. 161)