Figure 11-39 A3304A Jumpering; Table 11-27 J1 Jumper Function Description - HP 9000 Series Service Manual

• Synchronous spindle capability
• Data buffer size = 512 Kbytes
• Formatted data capacity limited to = 2132.62 Mbytes for compatability
• Programable sector reallocation scheme
• Flawed sector reaalocation at format time
• Reallocation of defects on command (post format)
• Embedded Grey Code track address to eliminate seek errors
• Command Queuing - 64 commands
• 7200 rpm spindle speed
• Average latency = 4.17 ms
• MTFB = 800,000 hours
• No preventative maintenance or adjustments required
• Low power consumption
• Vendor Indentification String = SEAGATE
• Product Indentification String = ST3225N
• Product Revision Level String = HP06 Multiuser
NOTE
The Product Revision Level String is subject to change due to newer firmware
revisions.
Jumpering

Figure 11-39 A3304A Jumpering

Table 11-27 J1 Jumper Function Description

Terminator Power From Drive
Terminator Power to SCSI Bus Pin 26
Terminator Power From SCSI Bus Pin 26
Terminator Power to SCSI Bus and Drive
SCSI Terminator Enable
Chapter 11
Source
SCSI Peripherals and I/O Information
Pins
1 &2
1 &3 (Default setting)
2 &4
1 &3, 2 &4
5 &6
11- 73