Figure 10-10 I/O Card Retainer Bracket Removal - D Class; Remove Eisa/Hsc Cards - HP 9000 Series Service Manual

Removal and Replacement Procedures

Remove EISA/HSC Cards

NOTE This may require the removal of the EMI shield as was done for removing the
Processor/Memory card.
1. Disconnect any external cables attached to the card(s) on the back of the system.
2. Loosen and remove the two screws that secure the I/O card retainer bracket to the I/O card guide.
(See Figure 10-10.)
Figure 10-10 I/O Card Retainer Bracket Removal — D Class
10-20 Chapter 10