Connectors/Cables - Sony XDS-PD2000 (J) Installation Manual

1-7. Connectors/Cables

When external cables are connected to the connectors of this unit, the hardware listed below (or equiva-
lents) must be used:
Panel indication
REF. VIDEO INPUT
COMPOSITE OUTPUT 1, MONI/2
TIME CODE IN/OUT2
TIME CODE OUT 1
SYSTEM TC INPUT
SD-SDI OUTPUT 1 1, 2 (SUPER)
SD-SDI MONITOR/OUTPUT 2 1, 2 (SUPER)
DVB-ASI OUT (OPTION)
HD/SD-SDI INPUT
HD-SDI OUTPUT 1 1, 2 (SUPER)
DIGITAL AUDIO (AES/EBU) IN
DIGITAL AUDIO (AES/EBU) OUT
HD-SDI MONITOR/OUTPUT 2 1, 2 (SUPER)
HDMI OUTPUT
ANALOG AUDIO INPUT 1, 2
ANALOG AUDIO OUTPUT 1 1, 2
ANALOG AUDIO MONITOR/OUTPUT 2 R/1, L/2 (1-508-083-00)
REMOTE (9P) R/P2, P1
VIDEO CONTROL
PHONES
GPIO
MONITOR
(NETWORK)
XDS-PD2000/PD1000
Connection connector Connection cable
(Sony P/N)
Plug, BNC, 75 Z
BELDEN 8281 cable or equivalent
Plug, BNC, 75 Z
BELDEN 8281 cable or equivalent
Maximum cable length: 200 m
Plug, BNC, 75 Z
BELDEN 1694A cable or equivalent
Maximum cable length: 100 m
HDMI type A Commercially available HDMI cable with
plug is recommended
_
XLR 3P, MALE
(1-508-084-00)
_
XLR 3P, FEMALE
D-sub 9P MALE 9P remote control cable (RCC-G series)
RCC-5G (5 m)/10G (10 m)/30G (30 m)
JM-60 stereo phone plug _
(commercially available)
_
D-sub 15P MALE
RJ-45 8P 1000BASE-T standard conformity article
STP UTP cable is recommended
(STP: Shielded Twist Pair)
1-13 (E)