Operating Conditions; Power Supply; Voltage And Power Requirements; Recommended Power Cord - Sony XDS-PD2000 (J) Installation Manual

1-3. Operating Conditions

c
Good air circulation is essential to prevent internal heat build-up. Place the unit in location with suffi cient
air circulation.
Do not block the ventilation holes of the cabinet and the front and rear panels.
Operating temperature: 5 dC to 40 dC
Operating humidity: 20 % to 90 % (non-condensing)
_20 dC to 60 dC
Storage temperature:
Locations to avoid:
. Areas where the unit will be exposed to direct sunlight of any other strong lights.
. Areas near heat sources.
. Dusty areas or areas subject to vibration.
. Areas with strong magnetic fi eld.
. Areas with much electrical noise.
. Areas with much static electricity.
. Areas that is impossible to fi nd a specifi ed room for installation.
(Refer to "1-5. Installation Space".)
. Areas windtight.
Tilt allowance: Within 30d
Do not slant the front and rear of the unit more than 30d.
c
Fix the unit securely to avoid drop when the unit is operated at not-horizontal place.

1-4. Power Supply

1-4-1. Voltage and Power Requirements

This unit's power line has a switching regulator.
c
Be sure to operate the unit within the range of following power voltage.
Power voltage: AC 100 to 240 V
Power frequency: 50 Hz or 60 Hz
Power consumption: XDS-PD2000 (J): Maximum 210 W
XDS-PD2000:
XDS-PD1000:

1-4-2. Recommended Power Cord

This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales Offi ce/Service Center.
w
. Use the approved Power Cord (3-core mains lead)/Appliance Connector/Plug with earthing-contacts
that conforms to the safety regulations of each country if applicable.
. Use the Power Cord (3-core mains lead)/Appliance Connector/Plug conforming to the proper ratings
(Voltage, Ampere).
XDS-PD2000/PD1000
Maximum 210 W
Maximum 190 W
1-3 (E)